Ball Lock Kegs

This 1-gallon keg is lightweight, compact and has high oxygen barrier properties with 3x better (meaning less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages.

This product is sold with the PCO38 cap, however if you would like to dispense this product through a draft system, we recommend the use of the Ball Lock Adapter Tapping Head. The tapping head is sold separately and allows you to attach standard ball lock disconnects and pressure relief valve to the top of the keg.

This 2-gallon keg is lightweight, compact and has high oxygen barrier properties with 3x better (meaning less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages.

This product is sold with the PCO38 cap, however if you would like to dispense this product through a draft system, we recommend the use of the Ball Lock Adapter Tapping Head. The tapping head is sold separately and allows you to attach standard ball lock disconnects and pressure relief valve to the top of the keg.

Duotight spunding inline regulator in line

Relieves pressure while filtering from one keg to another while also letting you read the pressure in the receiving keg.

Note: The very end of the pressure relief valve can be adjusted by unscrewing to adjust the pressure. If tight, and not adjustable by hand, it needs to be loosened with pliers. Wrap a towel around the end piece of the pressure relief valve (about the last 1/4 in) and loosen with pliers. Then finger tighten or loosen to desired pressure.

Gauge reads 0 - 15 psi

New 5 gallon Kegland kegs offer convenience, security and insurance when compared to used or reconditioned kegs. There's no need to replace gaskets or other parts, no need to trust that someone else did a good job with reconditioning, and no possibility of residual flavor or aromas getting into your beer!

Features:

Ball lock
130 PSI Operating Pressure
5 Gallon (19 L) Capacity
Dry Hop Tab Welded into Lid
304 Stainless Steel

Height: 24.75 in.
Diameter: 8.375 in

Laser welded 304 SS construction and rolled Stainless Handles

These are stackable kegs, any size stacks on any other size. This means you'll be able to save space in the garage or kegerator, since they can be stacked w/ ball lock fittings attached and serving.

Special Order Item, call for availability!
Laser welded 304 SS construction and rolled Stainless Handles

These are stackable kegs, any size stacks on any other size. This means you'll be able to save space in the garage or kegerator, since they can be stacked w/ ball lock fittings attached and serving.

The easiest way to carbonate any beverage. This is a Cornelius keg lid with built-in carbonation stone! Move the lid from keg to keg to carbonate as needed. Allows you to force carbonate quickly using the attached .5 micron stone with the portability of being able to move the lid from keg to keg. No more hassles of trying to attach and unattach line from the "gas in" dip tube. Simply connect your gas quick disconnect to the included fitting on the lid and allow carbonation to begin. Sometimes also called a carbonater.

Laser welded 304 SS construction and rolled Stainless Handles

Available in standard sizing or Slimeline
Slimline Torpedos are slightly thinner and taller than most kegs, see dimensions below.

These are stackable kegs, any size stacks on any other size. This means you'll be able to save space in the garage or kegerator, since they can be stacked w/ ball lock fittings attached and serving.

Features:

Laser welded 304 SS construction and rolled Stainless Handles

Available in standard sizing or Slimeline
Slimline Torpedos are slightly thinner and taller than most kegs, see dimensions below.

These are stackable kegs, any size stacks on any other size. This means you'll be able to save space in the garage or kegerator, since they can be stacked w/ ball lock fittings attached and serving.

Features: