Wine Fermenting Equipment

This glass beverage dispenser will look great on your counter or home bar, whether you're pouring lemon water, sun tea, kombucha, or pre-mixed cocktails. The infuser allows you to add citrus or other flavors to your beverage while keeping pulp and other solids out of your glasses. Wide mouth lid for easy cleaning between uses. Features a stainless steel spigot that will stand up to corrosion no matter what beverage you're serving.

6 gallon bucket for fermentation, cleaning and sanitizing, and general use.

Made of food grade HDPE, lightweight and strong.

This bucket has volume markers printed on the side in 1/2 gallon increments, up to 5 gallons.

The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing. Control both heating and cooling, and set independent differentials for each to keep the exact temperature you need.

The Inkbird controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control.

This bung has a flap to allow gas to escape your fermenter, but the flap is closed otherwise to prevent air back in the fermenter. Great for long term sealing a fermenter when an airlock would dry out.

Spigot fits standard 5/16"and 7/16" hose.
When the valve is open and close, the hose does not turn.
Small body makes it easy to clean and takes less space than regular spigot.
Short Spigot fitting design, makes it easy to place it closer to the bottom of the Primary.
Comes assembled with O-ring and nut.
Fits 1" hole.

Tips

Brilliantly clear with a 4" wide mouth opening and rib- less side make mixing and cleaning a breeze.

Requires a #10 stopper or PET plastic carboy bung

Brilliantly clear with a 4" wide mouth opening and rib- less side make mixing and cleaning a breeze.

Requires a #10 stopper or PET plastic carboy bung

The ANVIL Temperature Controller is tuned and designed for home brewing. No need to spend time configuring and fiddling with settings. Just plug it in and start controlling your temps! The unique design has an integral male plug on the back allowing it to be to plugged into any 120V wall receptacle greatly reducing cable clutter and eliminating the need to drill holes for mounting. Simply plug your refrigerator or pump into the front and you’re ready to go. The 9.5 ft long sensor cable reaches anywhere you need.

Brilliantly clear with built-in 5-Gallon and 6-Gallon markers on the side for your convenience. The 4" wide mouth opening and rib- less side make mixing and cleaning a breeze. Requires a #10 stopper or PET plastic carboy bung

Brilliantly clear with built-in 5-Gallon and 6-Gallon and 7-Gallon markers on the side for your convenience. The 4" wide mouth opening and rib- less side make mixing and cleaning a breeze. Requires a #10 stopper or PET plastic carboy bung