DuoTight Keg Fittings

For clean, straight cuts this 2-in-1 cutter is hard to beat. Developed specifically for EVABarrier draft line, but compatible with any tubing that is 3/8" OD or smaller. Features an 8mm jaw on the back to easily pull the collet back when removing line from Duotight fittings.

This push-in pressure gauge comes with an 8 mm (5/16 in.) barb and is specifically designed to be compatible with 8 mm Duotight fittings. It's the ideal companion to a Spunding Valve (FE960), allowing you to dial in your blow off setting for pressure fermentations or pressure transfers. Triple-scaled to read in psi, bar, and kPa.

This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 8 mm OD Tubing.

This Duotight fitting makes it easy to split your gas line and run it to multiple kegs. Use one tee for a dual tap kegerator or two tees for a triple tap. You can also pair the tee with the Push-In Pressure Gauge to use the gauge with the BlowTie Spunding Valve. Compatible with EVABarrier 8 mm OD Tubing.

This Duotight joiner fitting is compatible with EVABarrier 8 mm OD Tubing.

Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!

This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing.

Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!

This Duotight fitting with 5/8" FPT can be used to connect beverage line to faucet shanks instead of a tailpiece, and it's also a convenient option for connecting gas and beverage line to the gas in and bev out on keg couplers.